PMOD H-BRIDGE
Stok Kodu
PMOD-HB3
946,16 TL
PmodHB3
H-bridge w/ feedback inputs
The Digilent PmodHB3 2A H-Bridge Module (the HB3) is an ideal solution for robotics and other applications where logic signals are used to drive small to medium-sized DC motors.
The HB3 works with power supply voltages from 2.5V to 5V, but is normally operated at 3.3V as this is the supply voltage on most Digilent system boards.
The HB3 is designed to work with either Digilent programmable logic system boards or embedded control system boards. Most Digilent system boards, such as the Nexys, Basys, or Cerebot, have 6-pin connectors that allow the HB3 to plug directly into the system board or to connect via a Digilent 6-pin cable.
The HB3 works with power supply voltages from 2.5V to 5V, but is normally operated at 3.3V as this is the supply voltage on most Digilent system boards.
The HB3 is designed to work with either Digilent programmable logic system boards or embedded control system boards. Most Digilent system boards, such as the Nexys, Basys, or Cerebot, have 6-pin connectors that allow the HB3 to plug directly into the system board or to connect via a Digilent 6-pin cable.
2A H-bridge circuit for voltages up to 12V
Two 2-pin screw terminal blocks for connection to motor
Small size (0.8" x 1.20")
Bu ürüne ilk yorumu siz yapın! LÜTFEN Sorularınızı bu alana yazmayınız. Sorularınız için info@elektrovadi.com